500 Kw Thermal Oil Boiler System For Wood Processing Timber Mill Low Pressure

YYQ 500 Kw Thermal Oil Boiler System For Wood Processing Timber Mill

Thermal Oil Boiler System introduction

The boiler is a new type of boiler that uses gas or fuel as fuel. The hot oil is used as a heat transfer medium, and the heated heat transfer medium is sent to the heat device, and the low temperature heat transfer medium is sent to the boiler for heating, thereby circulating.

The boiler can provide high temperature above 300 °C for heating equipment under low pressure conditions of 1 MPa and below, and can provide two or more different temperatures according to the requirements of the heat equipment.

The Advantages of Thermal Oil Boiler System Design

1. The design is compact and easy to transport and install.

2. With a variety of intelligent design, such as automatic detection, automatic control, automatic alarm and other functions, can achieve automatic operation of the boiler unattended state, saving labor costs.

3. The boiler heating surface adopts coil design to ensure sufficient heating surface and improve thermal efficiency.

4. At the tail of the boiler, an air preheater using waste heat is installed to improve the efficiency of heat utilization.

5. Compared with other types of boilers, the installation of water treatment equipment is not used, which saves costs.

Thermal Oil Boiler System ​Technical parameters table

The listed technical parameters are for reference only and can be designed according to different requirements of users.

Thermal Oil Boiler System Application use industry

1. In the road construction project, it is mainly used for heating and insulation of asphalt heating, dissolving, asphalt storage tank, asphalt concrete and emulsified asphalt.
   2. In the building materials industry, the heat transfer oil furnace is mainly used for gypsum board drying, concrete member solidification protection and prefabrication production, tile stamping, decorative material drying and linoleum production line heat.
   3. In the wood industry, it is mainly used for the hot pressing of fiberboard, particleboard, laminate, plywood, veneer and wood drying equipment, drying equipment, coating equipment and glue machine heating.
   4. In the fat industry, the heat transfer oil furnace is mainly used for heating of oil, such as oil decomposition, fatty acid distillation, lipidation, nitrification, hydrogenation reflection, concentration, vacuum deodorization and the like.
   5. In the paper industry, it is mainly used for heating of glue roller, drying roller, drying room, drying cabinet, hot melt machine, melting wax pot and corrugated paper processing.
   6. In the fat and paint industry, it is mainly used for heating in autoclaves, dryers, distillation irrigation, evaporation equipment, paint drying, baking, drying and high temperature curing.
   7. In the medical industry, it is mainly used for the preparation of drugs, raw material mixing, disposition, disinfection, distillation, evaporation, melting and other equipment and equipment heating.

Thermal Oil Boiler System technical data sheet

Thermal Oil Boiler System FAQ:

Dear friend,

Thanks for your time for scanning our products.
We need the following information to confirm the boiler model:
1.Boiler type: Thermal Oil Boiler System
2.Boiler capacity?
3. Boiler pressure?
4. Boiler application?
After confirming these questions, we will know exactly what boiler will be suitable for you and we will provide you our product details and quotation. Thank u.

It is ok to copy the question and answers directly when sending us the inquiry!

Welcome you any time!